A 5-ton vertical press, this versatile machine is able to service a wide range of hot stamping applications including :

• Retail Bags
   
• Retail Boxes
   
• Books & Folders
   
• Leather products
   
• Plastic containers
   
• Signs, Badges & Plaques
   
• Plastic Parts of many kinds
   
• Matt board, Art papers & Photo mounts
   
• Extra-long, extra-wide and continuous pieces

The M is a new twist on Malahide's core technology, the E-Series all-electric print-head.  Whereas on E-Series machines we use the print head to pull inward, the M-Series presses downwards.  Enabling the machine to approach parts from a new direction, this design difference enables Malahide to now serve applications that we could not previously address.

Delivering 5 tons of pressure across a print area of up to 6" x 12", the M-Series uses no compressed air in it's operation.  With no air required, the machine instantly becomes simpler to deploy, less expensive to power and significantly quieter when in operation. 

Maintenance requirements are also reduced because our all-electric platform eliminates entire classes of pneumatic components that can go wrong, such as valves, seals and hoses.  Simplifying both initial setup and long-term maintenance, our electric design = operational cost savings throughout the machine's whole working life.

Frame, Size and Customization :

Design innovations continue in our approach to the frame.  Built with flexibility in mind, M-Series machines feature : 

• I-Beam frame construction that allows the machine to be stretched wider, made taller, or placed in-line with secondary equipment. 
     

• The lack of a back column enables the press to handle extra-long parts, straddle a conveyor, or have a web or extruded product running straight through.
   

• Provides a sturdy base onto which a variety of parts fixtures or bases can be built
   

• Robotic feeders are welcomed by a wide-open front or back.

Print Engine :

One central CAM mechanism supplies mechanical power to the print head.  Smooth and precise, all bearings and parts are purposefully oversized to ensure long life and durability. The M generates up to 5 tons of pressure, more than sufficient to stamp broad coverage artwork and fine details.

The CAM mechanism powers the print head, pushing it down from all four corners.  This results in an even dispersion of pressure.  2 heaters ensure even heating, and 4 leveling screws on the top of the head allow for fine adjustment. 

A central pivot allows one to rotate the head 5 degrees each way for fine alignment.

Print Head : The print head has several features that are used to perfect the hot stamp:

• Four leveling screws on the top of the head allow for fine adjustment.

• A central pivot allows one to pivot the head into alignment with the part. 

• A central heater runs the length of the head to ensure even heating. 

Foil Feed :

The foil feeds into the machine, beneath the print head, and towards the rear where it is threaded through the drive system.

The foil advance is adjusted by means of a crank located within the upper case. One simply unlocks a nut, and then turns a knob to adjust the ribbon pull from 1" ~ 6.25".

Hand Switches :

In semi-automatic operation, the press is activated by two LED hand switches that minimize operator strain.  Fully interlocked, the switches must be tripped simultaneously, and then held down until the M completes its down stroke.

In fully automatic mode, the press is activated by a synchronization signal being sent to it by an external control system.  Fixed guards or light curtains can be added as required.

Control Box :

An intuitive set of controls help the M to be easy to understand and operate.  Standard controls include :

Power On/Off
Jog Button
Start Button
Stop Button
Motor Speed
Chase Lock
Heat Control
Dwell Time
Foil Delay

The ' M ' Stands for Masterpiece !

There are many hot stamping machines to choose from, but only 1 all-electric vertical hot stamper. 

The M-Series equips today's hot stamp professional with a cost-effective and environmentally friendly alternative to legacy equipment.  A fresh and innovative design in a market filled with otherwise generic equipment, put the M to work in your factory . . . and expect Marvelous results.

Specifications :